Learn from an article or file

Turns an article or file into learning sessions that fit your goal, level and time, with comprehension questions for each session.

What you send

Teach me the material attached or pasted below, based on my goal, level and available time. Split it into sessions that fit my time, explain one or two ideas per session with an everyday example, and add two comprehension questions per session. Don’t write the answers; wait for mine and review them. Use only the material, and if my goal needs information it does not contain, list it as a question for me to look up.

Goal: I want to understand the idea well enough to explain it to my family before we decide whether to install solar panels on our roof.
Level: beginner; I have not studied physics since secondary school.
Available time: 20 minutes a day for 3 days.
Material (pasted article): How do solar panels work? A solar panel is made of small cells, usually made of silicon. When sunlight falls on a cell, its energy frees electrons inside it, and the structure of the cell pushes them in one direction, producing direct current. Cells are connected inside the panel to raise the voltage, and panels are connected to each other to increase the power. Most household appliances run on alternating current, so the current passes through a device called an inverter that converts it to alternating current. A panel produces less when it is covered in dust or shaded, and its efficiency drops slightly as it heats up in summer. That is why panels should be cleaned regularly and installed at a direction and tilt that suit the city’s location. Because panels produce nothing at night, some systems use batteries that store the daytime surplus, while others are connected to the power grid.

What you get

Here is a 3-day, 20-minute-per-day beginner plan based only on the article you pasted.

I will not write the answers to the comprehension questions. After you send your answers for Day 1, I will review them, correct any misunderstanding, and then we can move to Day 2.


Overall goal

By the end of the 3 sessions, you should be able to explain to your family:

  1. What a solar panel is made of and how sunlight creates electricity in it.
  2. Why the electricity from the panel must be converted for household appliances.
  3. What affects panel output and why batteries or grid connection matter.

Day 1 — How a solar cell makes electricity

Time: 20 minutes
Focus: One or two ideas only:

  • A solar panel is made of small cells, usually silicon.
  • Sunlight frees electrons inside the cell, and the cell pushes them in one direction, producing direct current.

Simple explanation from the material

A solar panel is not one big solid piece that “makes electricity” by itself. It is made of many small cells. When sunlight falls on a cell, the energy in the sunlight frees electrons inside the cell. The structure of the cell then pushes those electrons in one direction. That one-direction flow is called direct current.

Everyday example

Imagine a row of small rooms inside a building. Sunlight is like a signal that wakes up people inside the rooms. The building’s layout makes them all move toward one exit. That organized movement is like the cell pushing electrons in one direction.

What you can say to your family

“Solar panels are made of small cells. Sunlight gives energy that frees electrons inside those cells, and the cell structure pushes them in one direction, producing direct current.”

Comprehension questions — Day 1

Answer these in your own words:

  1. According to the article, what happens when sunlight falls on a solar cell?
  2. Why does the article say the cell produces direct current?

Please send your answers for Day 1 only, and I will review them before we continue.


Day 2 — From one cell to household use: voltage, power, and the inverter

Time: 20 minutes
Focus: Two ideas:

  • Cells are connected inside the panel to raise voltage.
  • Panels are connected to each other to increase power.
  • Household appliances use alternating current, so an inverter converts the panel’s direct current into alternating current.

Simple explanation from the material

One solar cell alone is not enough for a home. Inside a panel, many cells are connected together to raise the voltage. Multiple panels can also be connected together to increase the power.

The article also says that most household appliances run on alternating current, while the panel produces direct current. So the electricity passes through a device called an inverter, which converts direct current into alternating current.

Everyday example

Think of the panel’s electricity as speaking one “electrical language,” called direct current. Many household appliances expect another “electrical language,” called alternating current. The inverter is like a translator between the two.

What you can say to your family

“The panel contains many cells connected together to increase voltage, and several panels can be connected to increase power. Because appliances need alternating current, an inverter converts the panel’s direct current into alternating current.”

Comprehension questions — Day 2

Answer these after Day 1 is reviewed:

  1. Why are cells connected inside a panel, and why are panels connected to each other?
  2. What is the job of the inverter?

Day 3 — What reduces output, and why batteries or the grid matter

Time: 20 minutes
Focus: Two ideas:

  • Dust, shade, and heat can reduce panel output.
  • Panels produce nothing at night, so systems may use batteries or connect to the grid.

Simple explanation from the material

A panel produces less when it is covered in dust or shaded. Its efficiency also drops slightly when it heats up in summer. Because of this, panels should be cleaned regularly and installed at a direction and tilt that suit the city’s location.

Also, panels produce nothing at night. Some systems use batteries to store the daytime surplus, while others are connected to the power grid.

Everyday example

A dusty or shaded panel is like a window covered with dirt or a curtain: less sunlight reaches it. Night is like turning off the sunlight supply. A battery is like a storage tank that keeps some daytime surplus for later, while grid connection is like having another supply source when the panels are not producing.

What you can say to your family

“Panels make less if they are dirty, shaded, or too hot, so cleaning and proper direction/tilt matter. They produce nothing at night, so the home may need batteries to store daytime surplus or a grid connection to keep power available.”

Comprehension questions — Day 3

Answer these after Day 2 is reviewed:

  1. Name two things that can make a solar panel produce less electricity.
  2. Why might a home with solar panels still need batteries or a grid connection?

Questions you should look up before your family decision

The article explains the basic idea, but it does not contain enough information to decide whether to install solar panels. Before your family discussion, look up these questions for your specific situation:

  1. What do voltage and power mean in simple household terms?
  2. What is the difference between direct current and alternating current?
  3. How much electricity does our household use per day or month?
  4. What size solar system would our roof need?
  5. What are the costs of panels, inverter, installation, and maintenance in our area?
  6. Are there any local incentives, subsidies, tax benefits, or financing options?
  7. Is our roof suitable? Consider roof age, material, strength, orientation, and available space.
  8. What is the best panel direction and tilt for our city?
  9. How much does dust, shade, or heat reduce output in our local conditions?
  10. Do we need batteries, or is grid connection enough?
  11. What is the local grid connection process, and does it allow exporting surplus electricity?
  12. What happens to our system during a power outage?
  13. What is the expected lifespan of the panels, inverter, and batteries?
  14. What warranties are offered by the installer and manufacturers?
  15. How often should the panels be cleaned, and what will that cost?
  16. Are there local permits, rules, or inspections required?
  17. How do we compare quotes from different installers fairly?
  18. What shading from trees, buildings, chimneys, or antennas might affect the panels?
  19. How does cloudy weather affect production in our area?
  20. What is the realistic payback period for our household?

Please reply with your answers to Day 1 only:

  1. According to the article, what happens when sunlight falls on a solar cell?
  2. Why does the article say the cell produces direct current?

How it works

  1. Attach the file or paste the article, and state your goal, level and available time.
  2. Work through the sessions in order, and send your answers to the questions for the tutor to review.
  3. Ask for a simpler explanation or more questions on any part that is unclear.

Related use cases